Cold Shrink Terminations

3m™ Cold Shrink Qt-Ii Terminations Provide Easy Installation For A Broad Spectrum Of Indoor And Outdoor Applications. The Cold Shrink Qt-Ii Termination Is Based On Specially Formulated, Track-Resistant Silicone Rubber Insulators With Built-In Hi-K Stress Relief. The Insulators Are Pre-Stretched Around A Spiral -Wound, Plastic Core. When The Terminator Is Slipped Over A Properly Prepared Cable And The Core Is Removed, The Terminator Immediately Shrinks To The Cable`s Dimensions. The Result Is A Void-Free, Flexible Seal Without Special Tools Or Torches. For Tape, Wire, An Unishield® Shield Cable.Conductor Size Range For· 5 Kv (100%): 600-1500 Kcmil · 5 Kv (133%): 600-1500 Kcmil · 8 Kv (100%): 600-1500 Kcmil · 8 Kv (133%): 500-1250 Kcmil · 15 Kv (100%): 500-1250 Kcmil · 15 Kv (133%): 350-1000 Kcmil

This Ground Strap Assembly Kit Is Designed For Grounding Tape And Wire-Shielded Power Cables. It Has 3 Per Bag And 9 Bags Per Case.

This Ground Strap Assembly Kit Is Designed For Grounding Tape And Wire-Shielded Power Cables. It Has 3 Per Bag And 9 Bags Per Case.

Each Kit Contains One Splice.

3m™ Cold Shrink Outdoor Termination Kit 5664, 15 Kv, 1.30-1.95 In (33,0-49,5 Mm) O.D.

Conductor Size Range For· 15 Kv: 2-2/0 Awg· 25/28 Kv: 2-1/0 Awg

3m™ Cold Shrink Qt-Ii Terminations Provide Easy Installation For A Broad Spectrum Of Indoor And Outdoor Applications. The Cold Shrink Qt-Ii Termination Is Based On Specially Formulated, Track-Resistant Silicone Rubber Insulators With Built-In Hi-K Stress Relief. The Insulators Are Pre-Stretched Around A Spiral -Wound, Plastic Core. When The Terminator Is Slipped Over A Properly Prepared Cable And The Core Is Removed, The Terminator Immediately Shrinks To The Cable`s Dimensions. The Result Is A Void-Free, Flexible Seal Without Special Tools Or Torches. For Concentric Neutral Cables.Conductor Size Range For· 5 Kv (100%): 3/0 Awg-500 Kcmil · 5 Kv (133%): 2/0 Awg-500 Kcmil · 8 Kv (100%): 2/0 Awg-500 Kcmil · 8 Kv (133%):1/0 Awg-350 Kcmil · 15 Kv: 2/0 Awg

3m™ Cold Shrink Qt-Ii Terminations Provide Easy Installation For A Broad Spectrum Of Indoor And Outdoor Applications. The Cold Shrink Qt-Ii Termination Is Based On Specially Formulated, Track-Resistant Silicone Rubber Insulators With Built-In Hi-K Stress Relief. The Insulators Are Pre-Stretched Around A Spiral -Wound, Plastic Core. When The Terminator Is Slipped Over A Properly Prepared Cable And The Core Is Removed, The Terminator Immediately Shrinks To The Cable's Dimensions. The Result Is A Void-Free, Flexible Seal Without Special Tools Or Torches. For Concentric Neutral Cables.

3m™ Cold Shrink Qt-Ii Terminations Provide Easy Installation For A Broad Spectrum Of Indoor And Outdoor Applications. The Cold Shrink Qt-Ii Termination Is Based On Specially Formulated, Track-Resistant Silicone Rubber Insulators With Built-In Hi-K Stress Relief. The Insulators Are Pre-Stretched Around A Spiral -Wound, Plastic Core. When The Terminator Is Slipped Over A Properly Prepared Cable And The Core Is Removed, The Terminator Immediately Shrinks To The Cable`s Dimensions. The Result Is A Void-Free, Flexible Seal Without Special Tools Or Torches. For Jacketed Concentric Neutral Cableconductor Size Range For· 15 Kv: 700-1500 Kcmil

3m™ Cold Shrink Qt-Ii Terminations Provide Easy Installation For A Broad Spectrum Of Indoor And Outdoor Applications. The Cold Shrink Qt-Ii Termination Is Based On Specially Formulated, Track-Resistant Silicone Rubber Insulators With Built-In Hi-K Stress Relief. The Insulators Are Pre-Stretched Around A Spiral -Wound, Plastic Core. When The Terminator Is Slipped Over A Properly Prepared Cable And The Core Is Removed, The Terminator Immediately Shrinks To The Cable`s Dimensions. The Result Is A Void-Free, Flexible Seal Without Special Tools Or Torches. For Jacketed Concentric Neutral Cableconductor Size Range For· 15 Kv: 750-1500 Kcmil · 25/28 Kv: 500-1250 Kcmil · 35 Kv: 350-1000 Kcmil

These Brackets Are Attached To The Cable Just Below The Termination. Cable O.D. Range: 1.80-2.40 In (46-61 Mm). Made From Galvanized Steel.

3m™ Cold Shrink Qt-Ii Terminations Provide Easy Installation For A Broad Spectrum Of Indoor And Outdoor Applications. The Cold Shrink Qt-Ii Termination Is Based On Specially Formulated, Track-Resistant Silicone Rubber Insulators With Built-In Hi-K Stress Relief. The Insulators Are Pre-Stretched Around A Spiral -Wound, Plastic Core. When The Terminator Is Slipped Over A Properly Prepared Cable And The Core Is Removed, The Terminator Immediately Shrinks To The Cable`s Dimensions. The Result Is A Void-Free, Flexible Seal Without Special Tools Or Torches. For Jacketed Concentric Neutral Cableconductor Size Range For· 15 Kv: 750-1500 Kcmil · 25/28 Kv: 500-1250 Kcmil

3m™ Cold Shrink Qt-Ii Terminations Provide Easy Installation For A Broad Spectrum Of Indoor And Outdoor Applications. The Cold Shrink Qt-Ii Termination Is Based On Specially Formulated, Track-Resistant Silicone Rubber Insulators With Built-In Hi-K Stress Relief. The Insulators Are Pre-Stretched Around A Spiral -Wound, Plastic Core. When The Terminator Is Slipped Over A Properly Prepared Cable And The Core Is Removed, The Terminator Immediately Shrinks To The Cable`s Dimensions. The Result Is A Void-Free, Flexible Seal Without Special Tools Or Torches. For Concentric Neutral Cables.Conductor Size Range For· 15 Kv: 1000-1750 Kcmil· 25/28 Kv: 750-1500 Kcmil · 35 Kv: 500-1250 Kcmil

Each Kit Contains Everything Needed (Except Terminal Lug) To Seal Three Cable Ends. Kits Can Be Used For Both Indoor (Protected) And Outdoor (Weather-Exposed) Applications. The Silicone Rubber Provides Tracking Protection For The Lug Ends Of The Cable.

Kit Includes: 1 Copper Screen Sleeve, 3 Mastic Seal Strips, 2 Constant Force Springs, 1 Preformed Ground Braid, And 1 Set Of Instructions.

The 3m™ Cold Shrink Qt-Ii Termination Is Based On Specially Formulated, Track-Resistant Silicone Rubber Insulators With Built-In Hi-K Stress Relief. Each Shielded Cable Kit Makes Three Terminations.Conductor Size Range For· 25/28 Kv (Stranded): 2 Awg· 25/28 Kv (Solid): 1 Awg

The 3m™ Cold Shrink Qt-Ii Termination Is Based On Specially Formulated, Track-Resistant Silicone Rubber Insulators With Built-In Hi-K Stress Relief. Each Shielded Cable Kit Makes Three Terminations.Conductor Size Range For· 25/28 Kv (Stranded):1/0 Awg· 25/28 Kv (Solid): (-)

The 3m™ Cold Shrink Qt-Ii Termination Is Based On Specially Formulated, Track-Resistant Silicone Rubber Insulators With Built-In Hi-K Stress Relief. Each Shielded Cable Kit Makes Three Terminations.Conductor Size Range For· 25/28 Kv (Stranded): 2/0 Awg· 25/28 Kv (Solid): 3/0 Awg

Each Termination Kit Has All Of The Materials Required To Make A Three Conductor Termination (Except Lugs, Which Must Be Ordered Separately).Conductor Size Range For· 5 Kv: 800-1000 Kcmil· 8 Kv: 750-1000 Kcmil· 15 Kv: 500-750 Kcmil· 25/28 Kv: 300-500 Kcmil

Each Termination Kit Has All Of The Materials Required To Make A Three Conductor Termination (Except Lugs, Which Must Be Ordered Separately).Conductor Size Range For· 5 Kv-100% (133%): 8-2 Awg (6-4 Awg)· 8 Kv-100% (133%): 6-4 Awg (6-4 Awg)

Each Termination Kit Has All Of The Materials Required To Make A Three Conductor Termination (Except Lugs, Which Must Be Ordered Separately).Conductor Size Range For· 15 Kv-100% (133%): 250-350 Kcmil (4/0 Awg-350 Kcmil)· 25/28 Kv-100% (133%): 2/0 Awg-250 Kcmil (1-4/0 Awg)· 35 Kv-100% (133%): 1/0-3/0 Awg (-)

The 3m™ Cross-Arm Mounting Bracket Mb-1 Is A Cross-Arm Bracket For Use In Holding Terminated Cable. The Mb-1 Is Ideal To Use When Ordering The Mb Or Mbs Termination Mounting Brackets Featured On This Page.

3m™ Cold Shrink Qt-Ii Outdoor Termination Kit 4605, 46 Kv

3m™ Cold Shrink Qt-Ii Outdoor Termination Kit 4604, 46 Kv

3m™ Cold Shrink Qt-Ii Terminations Provide Easy Installation For A Broad Spectrum Of Indoor And Outdoor Applications. The Cold Shrink Qt-Ii Termination Is Based On Specially Formulated, Track-Resistant Silicone Rubber Insulators With Built-In Hi-K Stress Relief. The Insulators Are Pre-Stretched Around A Spiral -Wound, Plastic Core. When The Terminator Is Slipped Over A Properly Prepared Cable And The Core Is Removed, The Terminator Immediately Shrinks To The Cable`s Dimensions. The Result Is A Void-Free, Flexible Seal Without Special Tools Or Torches. For Tape, Wire, An Unishield® Shield Cable.Conductor Size Range For· 15 Kv (100%): 750-1750 Kcmil · 15 Kv (133%): 700-1500 Kcmil · 25/28 Kv: 600-1250 Kcmil