Quote in 15 min·24/7 × 365AS9120:2025 · ISO 9001:2015 · FAA AC 00-56B
NSN 5330-01-557-7603CAGE Z0GL9

CR597308

Seal Plain

Seal Plain ASAP can help source this line with documentation review, alternate part checks, condition requirements, and account manager follow-up for urgent or planned procurement.

Applied Industrial Technologies
Manufacturer
USA
Origin
N/A
Spec
N/A
Unit weight
Detailed description

Technical sourcing notes

N/A
Lead time
N/A
Cross references
Unrestricted
Export control
5330 Packing and Gasket Materials
FSC
Why ASAP

Operations-grade aviation sourcing.

AS9120B
Quality-managed distribution
15 min
Average RFQ response, 24/7
Full trace
Documentation & certs on request
Submit RFQ

Request a quote for CR597308

Send this part to ASAP with quantity, need-by timing, and buyer contact details. An account manager will review availability, alternates, certificates, and delivery options.

Part-specific RFQ

Submit RFQ for CR597308

Send this part to ASAP with quantity, need-by timing, and buyer contact details. A dedicated account manager reviews availability, alternates, certificates, and delivery options.

Seal PlainCR597308
NSN5330-01-557-7603
Manufacturer
Applied Industrial Technologies
CAGE
Z0GL9
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Characteristics Data of NSN 5330-01-557-7603, 5330015577603

MRCCriteriaCharacteristic
FEATSpecial FeaturesSKF AXIAL CLAMP SEALS ARE PRODUCED IN THREE DIFFERENT DESIGNS:CT1, CT3, AND CT4 DESIGN; THESE AXIAL CLAMP SEALS ARE MADE OF APPROPRIATELY PROFILED STRIPS OF NON-REINFORCED NITRILE RUBBER WHICH ARE HELD FIRMLY IN PLACE BY STAINLESS STEEL SCREW-TYPE CLAMPS; THEY ARE AVAILABLE IN THE DIAMETER RANGE 150 TO 4600 MM; THE SEALS DO NOT ROTATE BUT SEAL AXIALLY AGAINST A ROTATING COUNTERFACE; CT3 DESIGN:THE SEALS OF THE CT3 DESIGN DIFFER FROM THOSE OF THE CT1 DESIGN ONLY IN THE FORM OF THE SEALING LIP; THIS IS AGAIN FLAT BUT IS PROVIDED WITH ANNULAR GROOVES; THESE SERVE TO TRAP CONTAMINANTS WHICH MAY HAVE STARTED TO PENETRATE THE LIP/COUNTERFACE CONTACT; THE MAXIMUM OPERATING INTERFERENCE FOR THESE SEALS IS +4,8 MM; SHAFT:42.500 IN.; OD:43.688 IN.; WEIGHT:4.250 LBS
CPCWHousing Bore Diameter0.937 INCHES NOMINAL
CXCYPart Name Assigned By Controlling AgencyAXIAL CLAMP SEALS CT3 DESIGN
MRCDecoded RequirementClear Text Reply
ADUCSeal Width1.125 INCHES NOMINAL