Fpga And Bga Heat Sinks

Boyd 10-6327-01g - 10mm Height, 28.5mm Length, 28.5mm Width - Pin Fin Heat Sink With Push Pin Attachment

Boyd 10-6326-28g - 6mm Height, 28mm Length, 28mm Width - Square Heat Sink With Push Pin Attachment

Boyd 10-5607-05g - 10mm Height, 37.4mm Length, 37.4mm Width - Square Heat Sink With Push Pin Attachment

Boyd 10-5607-04g - 10mm Height, 37.4mm Length, 37.4mm Width - Square Heat Sink With Push Pin Attachment

Boyd 10-5571-02 - 6mm Height, 37.4mm Length, 37.4mm Width - Square Heat Sink With Tape Attachment

Boyd 10-Thma-01g - 35mm Height, 34.9mm Length, 31mm Width - Solder Anchor Heat Sink For Flip Chip

Boyd 10-L4lb-11g - 11.7mm Height, 45.2mm Length, 41.4mm Width - Pin Fin Heat Sink With Push Pin Attachment

Boyd 10-L4lb-05g - 11.7mm Height, 45.2mm Length, 41.4mm Width - Pin Fin Heat Sink With Push Pin Attachment

Boyd 10-Cls2-01g - 35mm Height, 42.3mm Length, 42.3mm Width - Solder Anchor Heat Sink For Flip Chip

Boyd 10-Cls1-01g - 23mm Height, 42.3mm Length, 42.3mm Width - Solder Anchor Heat Sink For Flip Chip

Boyd 10-Brd2-01 - 23mm Height, 37.3mm Length, 35.7mm Width - Solder Anchor Heat Sink For Flip Chip

Boyd 125800d00000g - 2 - 4 Solder Anchors For Bga Pin Fin Heat Sinks Must Be Soldered To The Pcb Prior To Attaching The Heat Sink Clip. Pcb Thickness: 0.100 - 0.110 Inches "a" Dim: 4.70 (0.185) Part 125700d00000g Has Pcb Thickness Of 0.063 Inches And "a" Dim Of 3.61 (0.142).

Boyd 11-5608-13 - 11.5mm Height, 45mm Length, 41mm Width - Bga Fan Heat Sink Fan Size: 40x40x7 Fan Voltage: 12 Volts # Of Bearings: Single Connector Housing: Dupond 2 Pin Lead Length: 30 Mm Attachment: Plastic Push Pins Interface Material: Pre-Applied Hi Flow Phase Change

Boyd 11-5602-45g - 15mm Height, 40mm Length, 40mm Width - Bga Fan Heat Sink Fan Size: 40x40x10.5 Fan Voltage: 5 Volts # Of Bearings: Dual Connector Housing: Molex 3 Pin (Series 2695) Lead Length: 127 Mm Fan Sensor: 2 Pulses/Rotation Attachment: Plastic Push Pins

Boyd 11-5602-47g - 15mm Height, 40mm Length, 38.7mm Width - Bga Fan Heat Sink Fan Size: 40x40x10.5 Fan Voltage: 5 Volts # Of Bearings: Dual Connector Housing: Molex 3 Pin (Series 2695) Lead Length: 127 Mm Fan Sensor: 2 Pulses/Rotation Attachment: Epoxy Attach

Boyd 11-5602-50g - 11.5mm Height, 40mm Length, 40mm Width - Bga Fan Heat Sink Fan Size: 40x40x7 Fan Voltage: 12 Volts # Of Bearings: Single Connector Housing: 2 Pin Lead Length: 40 Mm Attachment: Plastic Push Pins Interface Material: Pre-Applied Hi Flow Phase Change

Boyd 125700d00000g - 2 - 4 Solder Anchors For Bga Pin Fin Heat Sinks Must Be Soldered To The Pcb Prior To Attaching The Heat Sink Clip. Pcb Thickness: 0.063 Inches "a" Dim: 3.61 (0.142) Part 125800d00000g Has Pcb Thickness Of 0.100 - 0.110 Inches And "a" Dim Of 4.70 (0.185).

Boyd 2342b-Tachg - 7mm Height, 44.6mm Length, 45.7mm Width - Pin Fin Heat Sink With Tape Attachment

Boyd 2518b-Ep11-Bgs2g - 15.6mm Height, 28.1mm Length, 30.5mm Width - Pin Fin Heat Sink With Bgs Clip Attachment

Boyd 2292bg - 28.58mm Length, 28.58mm Width - Bond-On Heat Sink For Leadless Chip Carriers And Flat Packs. Primarily Designed For 68-Position Devices.

Boyd 2296bg - 17.65mm Height, 31.75mm Length, 31.75mm Width - Bond-On Heat Sink For Leadless Chip Carriers And Flat Packs. Primarily Designed For 68-Position Devices.

Boyd 2317b-Ep11-Bgs1g - 15.2mm Height, 20.5mm Length, 26.1mm Width - Pin Fin Heat Sink With Bgs Clip Attachment

Boyd 2321b-Tachg - 8.9mm Height, 41.3mm Length, 43.2mm Width - Pin Fin Heat Sink With Tape Attachment

Boyd 2327b-Cp50g - 15.2mm Height, 28.1mm Length, 27.9mm Width - Pin Fin Heat Sink With Tape Attachment

Boyd 2327b-Tachg - 15.2mm Height, 28.1mm Length, 27.9mm Width - Pin Fin Heat Sink With Tape Attachment