Do you need assistance sourcing parts from the manufacturer Applied Industrial Technologies Inc with CAGE Code Z0GL9? Accelerating RFQs can help. We stock more than 2 billion new and after-market parts that are used within the aerospace and defense industries. We have NSN part numbers such as 597308, 597308, 597308, 597308, CR597308 with Item Name Seal Plain, Special Features: Skf axial clamp seals are produced in three different DESIGNS:CT1, CT3, and CT4 design; these axial clamp seals are made of appropriately profiled strips of non-reinforced nitrile rubber which are held firmly in place by stainless steel screw-type clamps; they are available in the diameter range 150 to 4600 mm; the seals do not rotate but seal axially against a rotating counterface; CT3 design:the seals of the CT3 design differ from those of the CT1 design only in the form of the sealing lip; this is again flat but is provided with annular grooves; these serve to trap contaminants which may have started to penetrate the lip/counterface contact; the maximum operating interference for these seals is +4, 8 mm; SHAFT:42.500 in.; OD:43.688 in.; WEIGHT:4.250 lbs III Part Name Assigned By Controlling Agency: Axial clamp seals CT3 design Seal Width: 1.125 inches nominal within our ready-to-ship inventory. You can trust us to quality-check each part before we ship them out.
Our team of experts perform visual checks on all parts and verify all qualifying paperwork. Our attention to detail has resulted in an FAA AC 0056B accreditation and we are proud members of the ASA. Submit an RFQ today for your required NSN parts under CAGE Code Z0GL9 and have the benefit of talking to a dedicated account manager within 15 minutes.